Skip to main content

Manufacturing, Construction,Transport >> Manufacturing Industry
« back to courses page

Learn a wide variety of maintenance skills needed in manufacturing, schools, factories, or service facilities.

There may be several more classes available!  Be sure to use the red navigation arrows or click "Show All".   You may also use the search feature at the top of your screen.

 
Covers numerous three-phase applications including: Explanation and benefits of this energy source; definitions of terms; applications and benefits of this energy source; applications for relays, starters, contacts, push button and stop switches, overloads, fuses and disconnects. Distribution systems (wye and delta) will be discussed, drawn (using standard drawing symbols), built, and tested. Prerequisite: Single Phase Circuits

Start date: 06/21/18

End date: 08/02/18

Tuition: $500.00

Materials Cost: $0.00

Weekly - Thu, Tue 6:00 PM - 10:00 PM (6/21/2018-8/2/2018)

Location : The Lowry Building Location : 
  The Lowry Building.

Room :  A19 -Lab

Contact Hours:36.00

Please read: Prerequisite: Single Phase Circuits (Basic ...More



View Details »
Covers: Basic CAD commands; Lines; Circles; Trim; Fillets; Arcs; Offsets; Arrays. Students gain experience moving, copying, performing extensions, and various other commands. Participants will also learn to save files as DXF and DWG formats, plot a file, dimension a drawing, make a drawing template with different layers, and insert a border into a file. Uses Auto Cad LT.

Start date: 07/09/18

End date: 08/06/18

Tuition: $475.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (7/9/2018-8/6/2018)

Location : Apollo -Adult Education (North End) Location : 
  Apollo -Adult Education (North End).

Room :  TBA -Check in at Office

Contact Hours:36.00

Please read: Prerequisite: HS Diploma or Equiv



View Details »
Covers: Basic CAD commands; Lines; Circles; Trim; Fillets; Arcs; Offsets; Arrays. Students gain experience moving, copying, performing extensions, and various other commands. Participants will also learn to save files as DXF and DWG formats, plot a file, dimension a drawing, make a drawing template with different layers, and insert a border into a file. Uses Auto Cad LT.

Start date: 01/07/19

End date: 02/06/19

Tuition: $475.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (1/7/2019-2/6/2019)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  406

Contact Hours:36.00

Please read: Prerequisite: HS Diploma or Equiv



View Details »
Prerequisite: Auto Cad I Auto Cad 2011 Fundamentals part 2 is used to develop orthographic drawings from isometric, oblique, or other pictorial drawings. Participants will also develop standard sectional views from pictorial views of an object.  

Start date: 05/03/18

End date: 06/12/18

Tuition: $475.00

Materials Cost: $0.00

Weekly - Thu, Tue 6:00 PM - 10:00 PM (5/3/2018-6/12/2018)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  406

Contact Hours:36.00

Please read: Prerequisite: HS Diploma or equivalant, Auto ...More



View Details »
Prerequisite: Auto Cad I Auto Cad 2011 Fundamentals part 2 is used to develop orthographic drawings from isometric, oblique, or other pictorial drawings. Participants will also develop standard sectional views from pictorial views of an object.  

Start date: 08/13/18

End date: 09/12/18

Tuition: $475.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (8/13/2018-9/12/2018)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  TBA

Contact Hours:40.00

Please read: Prerequisite: HS Diploma or equivalant, Auto ...More



View Details »
Prerequisite: Auto Cad I Auto Cad 2011 Fundamentals part 2 is used to develop orthographic drawings from isometric, oblique, or other pictorial drawings. Participants will also develop standard sectional views from pictorial views of an object.  

Start date: 02/11/19

End date: 03/13/19

Tuition: $475.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (2/11/2019-3/13/2019)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  406

Contact Hours:36.00

Please read: Prerequisite: HS Diploma or equivalant, Auto ...More



View Details »
Identification, installation, and removal of a variety of industrial rolling element bearings, including large diameter spherical roller bearings, cylindrical roller bearings, and needle bearings; shaft seals; pillow blocks; loose and interference bearing fit applications. Also covers precision shaft alignment (based on a standard centrifugal pump configuration); correcting parallel and angular misalignment in all directions; Multiple 'motor' positions and coupling types.

Start date: 09/17/18

End date: 10/15/18

Tuition: $500.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (9/17/2018-10/15/2018)

Location : The Lowry Building Location : 
  The Lowry Building.

Room :  A19 -Lab

Contact Hours:36.00

Please read: Prerequisites: HS Diploma or equivelant, ...More



View Details »
Identification, installation, and removal of a variety of industrial rolling element bearings, including large diameter spherical roller bearings, cylindrical roller bearings, and needle bearings; shaft seals; pillow blocks; loose and interference bearing fit applications. Also covers precision shaft alignment (based on a standard centrifugal pump configuration); correcting parallel and angular misalignment in all directions; Multiple 'motor' positions and coupling types.

Start date: 03/25/19

End date: 05/01/19

Tuition: $500.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (3/25/2019-5/1/2019)

Location : The Lowry Building Location : 
  The Lowry Building.

Room :  A19 -Lab

Contact Hours:40.00

Please read: Prerequisites: HS Diploma or equivelant, ...More



View Details »
This course is designed for anyone from a manufacturing setting who must interpret engineering specifications found on mechanical drawings. Participants are introduced to common ANSI drafting principles used to communicate information to the interpreter, with a strong focus on the development of visualization skills needed to obtain information from various orthographic projection views. Topics include: Parts of a print, line conventions, orthographic projection, linear and angular dimensioning systems, coordinate tolerancing systems, detail and assembly prints, sectional and detailed views, machined details and elements, introduction to geometric tolerances, pictorial drawings, welding and precision sheet metal prints, and first angle projection. Participants are encouraged to bring prints from their work place for use in the classroom. A continuation of Blueprint Reading I.

Start date: 05/30/18

End date: 06/27/18

Tuition: $475.00

Materials Cost: $0.00

Weekly - Wed, Mon 6:00 PM - 10:00 PM (5/30/2018-6/27/2018)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  240

Contact Hours:36.00

Please read: Prerequisite: Blueprint Reading I, Technical ...More



View Details »
This course is designed for anyone from a manufacturing setting who must interpret engineering specifications found on mechanical drawings. Participants are introduced to common ANSI drafting principles used to communicate information to the interpreter, with a strong focus on the development of visualization skills needed to obtain information from various orthographic projection views. Topics include: Parts of a print, line conventions, orthographic projection, linear and angular dimensioning systems, coordinate tolerancing systems, detail and assembly prints, sectional and detailed views, machined details and elements, introduction to geometric tolerances, pictorial drawings, welding and precision sheet metal prints, and first angle projection. Participants are encouraged to bring prints from their work place for use in the classroom. A continuation of Blueprint Reading I.

Start date: 06/20/18

End date: 07/25/18

Tuition: $475.00

Materials Cost: $0.00

Weekly - Wed, Mon 6:00 PM - 10:00 PM (6/20/2018-7/25/2018)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  406

Contact Hours:36.00

Please read: Prerequisite: Blueprint Reading I, Technical ...More



View Details »
Designed for welding and fabricators who must interpret engineering specifications found on weld detail drawings.

Start date: 05/02/18

End date: 06/11/18

Tuition: $475.00

Materials Cost: $0.00

Weekly - Wed, Mon 6:00 PM - 10:00 PM (5/2/2018-6/11/2018)

Location : Apollo -High School Main Location : 
  Apollo -High School Main.

Room :  408

Contact Hours:48.00



View Details »
Training in chain drive systems includes: Introduction to chain nomenclature; assembly, disassembly, alignment, and maintenance of chain drive systems; Use of straight keyed bore, taper bore, taper lock, and QD bushings is also addressed. Gear maintenance applications include: Gear identification, installation, alignment, and troubleshooting; Mounting and shimming tapered roller bearings using several different bearing housing types.

Start date: 08/13/18

End date: 09/12/18

Tuition: $500.00

Materials Cost: $0.00

Weekly - Mon, Wed 6:00 PM - 10:00 PM (8/13/2018-9/12/2018)

Location : The Lowry Building Location : 
  The Lowry Building.

Room :  A19 -Lab

Contact Hours:40.00

Please read: Prerequisite: Industrial Mechanics I ...More



View Details »
 
 
Questions? Contact us! 419-998-3000 Apollo Career Center Adult Education 3325 Shawnee Road - Lima OH 45806